A good example of a symmetrical object, which is impossible for other scanners to capture without the application of stickers.

SKU: 41e28dfff9cf Category:


A fine example of a symmetrical object that is next to impossible for the great majority of scanners to capture without the use of stickers. As a backdrop, Space Spider simply used the texture of the table that the gear was scanned on, and this avoided any registration problems.

By zooming in for a closer look, you can see the exact surface characteristics as if you were examining the original object itself. This level of accurate digital reproduction places such a 3D model into a category suitable for reverse engineering, quality inspection, as well as other design processes. 20 minutes of scanning to achieve this amazingly lifelike 3D model ready for CAD/CAM import.

3D printing settings

Layer Resolution: 0.2 mm for a balance of quality and speed.

Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)

Print Speed: 50-60 mm/sec for optimal surface quality.

Supports: Use for complex parts, set density at 15-20%.

Bed Adhesion: Use glue or tape to prevent warping.

Infill: 20% for regular models, 100% for extra strength if needed.