Universal Mount #1 Bicycle Accessory – 11/27/21

£17.99

Universal Mount #1 Bicycle Accessory – 11/27/21

Mounting Screws:

(2) 35mm screws with 6mm bolt head (the screw could be a bit longer. In the photo use a 40+mm screw)

(2) 6mm hex nuts (locking nuts would be better although not required)

The following File is included:

universal mount #1.stl

Materials used to create model in photos:

Overture Matte White PLA
Overture Matte Black PLA

SKU: 24baab1fc034 Category:

Description

Universal Mount #1 Bicycle Accessory – 11/27/21

Mounting Screws:

(2) 35mm screws with 6mm bolt head (the screw could be a bit longer. In the photo use a 40+mm screw)

(2) 6mm hex nuts (locking nuts would be better although not required)

The following File is included:

universal mount #1.stl

Materials used to create model in photos:

Overture Matte White PLA
Overture Matte Black PLA

3D printing settings

Printing Instructions:

20-100% infill (depending on the strength need for your accessory)
Any color PLA (perhaps using a color that matches your bike or a neutral color)
Base only supports