Description
These 3d printed parts print fairly easy but the battery cover mount does require supports. 0.3 layer height or better is recommended. 20% infill for a strong print.
Traxxas Phone Holder for Transmitter
£25.19
These 3d printed parts print fairly easy but the battery cover mount does require supports. 0.3 layer height or better is recommended. 20% infill for a strong print.
3D printing settings
Layer Resolution: 0.2 mm for a balance of quality and speed.
Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)
Print Speed: 50-60 mm/sec for optimal surface quality.
Supports: Use for complex parts, set density at 15-20%.
Bed Adhesion: Use glue or tape to prevent warping.
Infill: 20% for regular models, 100% for extra strength if needed.
