Top of hand

£15.73

A quick scan of the top of the hand with Spider allows you to see the fine details of the skin and nails.

SKU: f258d2e7980a Category:

Description

A very quick scan of the back of the hand with Space Spider lets us see the fine details of the skin and fingernails. For improvised demonstration purposes, this scan was performed quickly, yet already shows the intense surface detail captured by the scanner. For example, the folds of skin between thumb and forefinger, as well as the ridges along the fingernails. The areas between the fingers were quickly captured and show no signs of extraneous digital artifacts or noise.

In a clinical setting, such a scan would be performed on both sides of the hand, thus resulting in a seamless 3D digital model of the entire hand, perfectly lifelike from all angles.

3D printing settings


Layer Resolution: 0.2 mm for a balance of quality and speed.

Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)

Print Speed: 50-60 mm/sec for optimal surface quality.

Supports: Use for complex parts, set density at 15-20%.

Bed Adhesion: Use glue or tape to prevent warping.

Infill: 20% for regular models, 100% for extra strength if needed.