Screw

£17.50

Small object вАФ big challenge. How do you capture the thread of this 10 mm long screw using a 3D scanner?

SKU: 4d1fa13fe8cd Category:

Description

Small object вАФ big challenge. How do you capture the thread of this 10 mm long screw using a 3D scanner? Repetitive geometry has puzzled many of them. The scanner that holds the solution for this kind of task is Artec Micro. Micro recommends coating the screw with matting spray вАФ you don’t want to deal with those shiny parts of the surface post-scan, do you? вАФ Then simply mount the screw on the scanner’s rotating platform and click ¬ЂStart¬ї in Artec Studio software. Once the scanning session is over, just flip the screw over and launch scanning session 2 of 2. That’s really all it takes!

3D printing settings


Layer Resolution: 0.2 mm for a balance of quality and speed.

Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)

Print Speed: 50-60 mm/sec for optimal surface quality.

Supports: Use for complex parts, set density at 15-20%.

Bed Adhesion: Use glue or tape to prevent warping.

Infill: 20% for regular models, 100% for extra strength if needed.