Large female cane toad


The intricate geometry of the frog’s skin was captured by Artec Spider in just 6 minutes! The model was scanned in two passes.

SKU: 1547002f4e58 Category:


The intricate geometry of this toad’s skin was captured by Artec Space Spider in just 6 minutes! The toad was scanned in two passes, and it was important to hold the scanner at different angles in order to capture the difficult-to-see surfaces between the toes. The countless warts on the dorsal side of the toad have been captured in lifelike color 3D. Both forelimbs and both hind limbs, together with all the toes, appear as they did in everyday life, as if the toad had been scanned in the blink of an eye. The broad ranges of colors, textures, and shapes present in this 3D model are remarkable.

3D printing settings

Layer Resolution: 0.2 mm for a balance of quality and speed.

Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)

Print Speed: 50-60 mm/sec for optimal surface quality.

Supports: Use for complex parts, set density at 15-20%.

Bed Adhesion: Use glue or tape to prevent warping.

Infill: 20% for regular models, 100% for extra strength if needed.