Mushroom (pleurotus eryngii)

£4.27

This pleurotus eryngii mushroom was very easy to scan due to its size and thickness.

SKU: 86d5bfe3ebe9 Category:

Description

This pleurotus eryngii mushroom was very easy to scan due to its size and thickness. The matcap view of this model allows you to appreciate the detail under the cap and the thin bit of peeling skin on the stem. Space Spider has perfectly captured the complex dotted pattern across the top of the cap, and the variety of browns, tans, and whites present in the gills has been vividly carried over into this highly realistic color 3D model. All the nicks, dents, bumps, and irregularities of the original mushroom are all present in this 3D model.

3D printing settings


Layer Resolution: 0.2 mm for a balance of quality and speed.

Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)

Print Speed: 50-60 mm/sec for optimal surface quality.

Supports: Use for complex parts, set density at 15-20%.

Bed Adhesion: Use glue or tape to prevent warping.

Infill: 20% for regular models, 100% for extra strength if needed.

Related products