Panomic3D models are used by game developers, news agencies, architects, visual effects studios, advertisers, and creative professionals around the world.
£35.79
3D printable case for filament, for store it also during printing. It includes a main shell with holes for sensors and SilicaGel bags (for humidity control).
The files includes two version of the "B" shell part and the outside filter layer, with or without the sensor slot (two holes for fit a temperature and humidity sensor).
IMPORTANT
Check your inner diameter filament’s coil before print or buy it!
3D printable case for filament, for store it also during printing. It includes a main shell with holes for sensors and SilicaGel bags (for humidity control).
The files includes two version of the "B" shell part and the outside filter layer, with or without the sensor slot (two holes for fit a temperature and humidity sensor).
IMPORTANT
Check your inner diameter filament’s coil before print or buy it!
Layer Resolution: 0.2 mm for a balance of quality and speed.
Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)
Print Speed: 50-60 mm/sec for optimal surface quality.
Supports: Use for complex parts, set density at 15-20%.
Bed Adhesion: Use glue or tape to prevent warping.
Infill: 20% for regular models, 100% for extra strength if needed.
