Panomic3D models are used by game developers, news agencies, architects, visual effects studios, advertisers, and creative professionals around the world.
£5.40
This 3D model was created via a synergy of 3D data from an Artec Leo combined with texture from photogrammetry.
This 3D model was created via a synergy of 3D data from an Artec Leo combined with texture from photogrammetry. The first step was 3D scanning the car with Leo, during which extra time and care were taken to ensure that the fine geometry and many surfaces of the car were captured in full. The texture was made using photogrammetry, with more than 210 photos snapped at various heights during a period of 20 minutes.
Layer Resolution: 0.2 mm for a balance of quality and speed.
Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)
Print Speed: 50-60 mm/sec for optimal surface quality.
Supports: Use for complex parts, set density at 15-20%.
Bed Adhesion: Use glue or tape to prevent warping.
Infill: 20% for regular models, 100% for extra strength if needed.
