Panomic3D models are used by game developers, news agencies, architects, visual effects studios, advertisers, and creative professionals around the world.
£14.88
an alto trombone to print
you can print it in 3 parts if your printer is big enough.
otherwise, the main 3 parts can be printed and assembled individually, you need to print every part 1 time except the inner slide and outer slide connector that should be printed 4 times each.
an alto trombone to print
you can print it in 3 parts if your printer is big enough.
otherwise, the main 3 parts can be printed and assembled individually, you need to print every part 1 time except the inner slide and outer slide connector that should be printed 4 times each.
Layer Resolution: 0.2 mm for a balance of quality and speed.
Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)
Print Speed: 50-60 mm/sec for optimal surface quality.
Supports: Use for complex parts, set density at 15-20%.
Bed Adhesion: Use glue or tape to prevent warping.
Infill: 20% for regular models, 100% for extra strength if needed.
