Troll Skirmisher 02

£18.96

Pre-supported STL files included for Resin Printing • Editable Slicer Files included • Unsupported STL Files included • Separated Mini Bases • Designed for 28mm • Optmized STLs • Print QC: Triple Print Tested • Product Profile PDF included

SKU: da17302a0386 Category:

Description

Pre-supported STL files included for Resin Printing • Editable Slicer Files included • Unsupported STL Files included • Separated Mini Bases • Designed for 28mm • Optmized STLs • Print QC: Triple Print Tested • Product Profile PDF included

3D printing settings


Layer Resolution: 0.2 mm for a balance of quality and speed.

Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)

Print Speed: 50-60 mm/sec for optimal surface quality.

Supports: Use for complex parts, set density at 15-20%.

Bed Adhesion: Use glue or tape to prevent warping.

Infill: 20% for regular models, 100% for extra strength if needed.