STAMP FOR POLYMER CLAY PRINTED IN 3D-3D PRINTED POLYMER CLAY STAMP- SILHOUETTES OF FEMALE FACES-LORREN3D

3D printing settings

Layer Resolution: 0.2 mm for a balance of quality and speed.

Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)

Print Speed: 50-60 mm/sec for optimal surface quality.

Supports: Use for complex parts, set density at 15-20%.

Bed Adhesion: Use glue or tape to prevent warping.

Infill: 20% for regular models, 100% for extra strength if needed.