Smart car

£8.80

The complete model of this Smart car was created from approximately 10-13 scans taken from various positions around all sides of the vehicle. We also took two scans from below, with the car raised on a car lifter.

SKU: ef908a5c91f8 Category:

Description

The complete model of this Smart car was created from approximately 10-13 scans taken from various positions around all sides of the vehicle. We kept 10 spheres (from a Laser Scanner Reference Sphere Set) in the scanner’s field of view while capturing. We also took two scans from below, with the car raised on a car lifter.

In order to get the best results, all glass surfaces and shiny parts sprayed with talc before scanning.

The raw data were processed in Geomagic Design X software. Alignment and triangulation allowed us to get the final 3D model of the Smart car.

3D printing settings


Layer Resolution: 0.2 mm for a balance of quality and speed.

Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)

Print Speed: 50-60 mm/sec for optimal surface quality.

Supports: Use for complex parts, set density at 15-20%.

Bed Adhesion: Use glue or tape to prevent warping.

Infill: 20% for regular models, 100% for extra strength if needed.

Related products