Panomic3D models are used by game developers, news agencies, architects, visual effects studios, advertisers, and creative professionals around the world.
£17.99
Just some crusty punks with a big gun and a rough bike!
If you want to use this mini in hot wheels sized apocalyptic mayhem games (like Gaslands, etc.) then you’ll need to scale the miniature down in your slicing program to 87.5%.
This miniature is designed to print well in FDM. Resin printing is recommended for anything scaled smaller than 100% scale.
This model is 28mm scale and requires supports when printing. Raft recommended.
Just some crusty punks with a big gun and a rough bike!
If you want to use this mini in hot wheels sized apocalyptic mayhem games (like Gaslands, etc.) then you’ll need to scale the miniature down in your slicing program to 87.5%.
This miniature is designed to print well in FDM. Resin printing is recommended for anything scaled smaller than 100% scale.
This model is 28mm scale and requires supports when printing. Raft recommended.
Layer Resolution: 0.2 mm for a balance of quality and speed.
Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)
Print Speed: 50-60 mm/sec for optimal surface quality.
Supports: Use for complex parts, set density at 15-20%.
Bed Adhesion: Use glue or tape to prevent warping.
Infill: 20% for regular models, 100% for extra strength if needed.
