Description
3d models of onix and steelix at 1/20 scale.
onix is 18,5cm high
steelix is 20cm high
£28.63
3d models of onix and steelix at 1/20 scale.
onix is 18,5cm high
steelix is 20cm high
3d models of onix and steelix at 1/20 scale.
onix is 18,5cm high
steelix is 20cm high
Layer Resolution: 0.2 mm for a balance of quality and speed.
Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)
Print Speed: 50-60 mm/sec for optimal surface quality.
Supports: Use for complex parts, set density at 15-20%.
Bed Adhesion: Use glue or tape to prevent warping.
Infill: 20% for regular models, 100% for extra strength if needed.