Panomic3D models are used by game developers, news agencies, architects, visual effects studios, advertisers, and creative professionals around the world.
£5.00
A metal nut, just over 15 mm, easily scanned with Artec Micro in just two scans. Unlike handheld scanners, Micro was able to scan this piece without the need for any additional features or background.
A metal nut, just over 15 mm, easily scanned with Artec Micro in just two scans. Unlike handheld scanners, Micro was able to scan this piece without the need for any additional features or background. The fine ridges, which are visible thanks to the Micro’s very high 3D resolution, were used to align the two sides of the nut.
Layer Resolution: 0.2 mm for a balance of quality and speed.
Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)
Print Speed: 50-60 mm/sec for optimal surface quality.
Supports: Use for complex parts, set density at 15-20%.
Bed Adhesion: Use glue or tape to prevent warping.
Infill: 20% for regular models, 100% for extra strength if needed.
