Panomic3D models are used by game developers, news agencies, architects, visual effects studios, advertisers, and creative professionals around the world.
£64.40
Designed a LED RGBW Circle with a nice printable clear and minimalistic design.
You can control it with an App for Android or iOS via Bluetooth There are hundreds of different mods. You can use it also as a VU meter. So it’s Music controlled via an internal microphone or via AUX for a better visualization.
Used a SK6812 strip 144 LEDs per meter with RGB-WW. So u can use it also as an deco lamp with real warm light.
You can also do it with an ESP32 and WLED.
Designed a LED RGBW Circle with a nice printable clear and minimalistic design.
You can control it with an App for Android or iOS via Bluetooth There are hundreds of different mods. You can use it also as a VU meter. So it’s Music controlled via an internal microphone or via AUX for a better visualization.
Used a SK6812 strip 144 LEDs per meter with RGB-WW. So u can use it also as an deco lamp with real warm light.
You can also do it with an ESP32 and WLED.
Layer Resolution: 0.2 mm for a balance of quality and speed.
Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)
Print Speed: 50-60 mm/sec for optimal surface quality.
Supports: Use for complex parts, set density at 15-20%.
Bed Adhesion: Use glue or tape to prevent warping.
Infill: 20% for regular models, 100% for extra strength if needed.
