Hydrant

£18.55

This is a 3D model of a working hydrant on a street in Palo Alto, CA. To scan it, we used an Artec Eva connected to an Artec battery and a tablet for full scanning mobility.

SKU: 25ff2f848e29 Category:

Description

Every dog’s dream. This is a 3D model of a working fire hydrant on a street in Palo Alto, California. To scan it, we used an Artec Eva connected to an Artec battery and a tablet for complete freedom of scanning.

By zooming closer to the model, you can see the beautiful level of detail captured in a scan that took only 2 minutes from start to finish, and merely another 8 minutes for processing. Every curve and surface and contour has been captured in remarkable color 3D. Even with the irregular lighting conditions present in a street scan, the quality of Eva’s data was so high that very little processing was needed.

3D printing settings


Layer Resolution: 0.2 mm for a balance of quality and speed.

Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)

Print Speed: 50-60 mm/sec for optimal surface quality.

Supports: Use for complex parts, set density at 15-20%.

Bed Adhesion: Use glue or tape to prevent warping.

Infill: 20% for regular models, 100% for extra strength if needed.

Related products