Description
3 STL Files
Print Instructions for best results:
-) PLA
-) 10% Infill (gyroid) are sufficient
-) 0.16mm Layer Height
-) Use small feature speed 50% (Cura) or similar options in other slicers to get the small pins for the PCB board and lid joints right.
-) No Supports needed
Its powered by a 5V Micro USB Plug with minimum 1A power adapter.
Picture Dimension: 80x120mm (450x300pixel) pl 3mm wide and 2.5mm thin Border.
Parts List:
1x 12V LED Stripe (about 20cm)
1x StepUp Adjustable Converter (5V to 12V in this case)
1x Micro USB breakout board
And a bit of Hot Glue
You can find all parts on amazon easily.
The StepUp Boards are all the same dimensions usually so the mounting holes fit in most cases.
