Description
We used a tablet and the Artec battery pack so the scanning was really fast. It took only 4 minutes. The rich wooden texture of the floor ensured stable tracking when scanning between the feet.
Full body scan
£18.28
We used a tablet and the Artec battery pack so the scanning was really fast. It took only 4 minutes.
3D printing settings
Layer Resolution: 0.2 mm for a balance of quality and speed.
Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)
Print Speed: 50-60 mm/sec for optimal surface quality.
Supports: Use for complex parts, set density at 15-20%.
Bed Adhesion: Use glue or tape to prevent warping.
Infill: 20% for regular models, 100% for extra strength if needed.
