Breadboard with Storage for Crumbs

£18.55

Time for breadboard now you can print your own. Print using Wood PLA Base can be printer in less infill, but board need to be print with 100% infill to give better endurance oof board.

After print little sand and use wood stain.

When stain dry apply natural bee wax without additionals. Give it dry apply second time. You can use heatgun to help just don’t heat more then 50C.

Last step you can apply cutting board oil.

With time board need to be reprinted don’t cut meat on this board is just for bread and all crumbs come inside storage.

SKU: 1ab63dba9b6b Category:

Description

Time for breadboard now you can print your own. Print using Wood PLA Base can be printer in less infill, but board need to be print with 100% infill to give better endurance oof board.

After print little sand and use wood stain.

When stain dry apply natural bee wax without additionals. Give it dry apply second time. You can use heatgun to help just don’t heat more then 50C.

Last step you can apply cutting board oil.

With time board need to be reprinted don’t cut meat on this board is just for bread and all crumbs come inside storage.

3D printing settings


Layer Resolution: 0.2 mm for a balance of quality and speed.

Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)

Print Speed: 50-60 mm/sec for optimal surface quality.

Supports: Use for complex parts, set density at 15-20%.

Bed Adhesion: Use glue or tape to prevent warping.

Infill: 20% for regular models, 100% for extra strength if needed.

Related products