Articulated Tarantula


Creepy Articulated Tarantula!!

3 versions available:

– Tarantula_v2_baseA.stl
– Tarantula_v2_baseB.stl
– Tarantula_v2_baseC.stl
– Tarantula_v2.stl

SKU: 05f8095df545 Category:


Creepy Articulated Tarantula!!

3 versions available:

– Tarantula_v2_baseA.stl: Includes easy-to-remove bases on both sides of the legs, for easier printing. After printing, just remove carefully the leg tabs (see postprinting video).
– Tarantula_v2_baseB.stl: Includes easy-to-remove bases on the legs, just on the tips.
– Tarantula_v2_baseC.stl: Includes full base for maximum bed adhesion.
– Tarantula_v2.stl: Original tarantula without base tabs (you may need raft or brim for the legs to stick correctly on the bed).

3D printing settings

Layer Resolution: 0.2 mm for a balance of quality and speed.

Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)

Print Speed: 50-60 mm/sec for optimal surface quality.

Supports: Use for complex parts, set density at 15-20%.

Bed Adhesion: Use glue or tape to prevent warping.

Infill: 20% for regular models, 100% for extra strength if needed.