Description
lower for AR-15 with wall reinforcement designed for 3d printing.
Small but important changes, reinforcements in fragile areas and printability
AR-15 Lower Multi Cal.
£12.99
lower for AR-15 with wall reinforcement designed for 3d printing.
Small but important changes, reinforcements in fragile areas and printability
3D printing settings
Layer Resolution: 0.2 mm for a balance of quality and speed.
Extruder Temperature: 200°C for PLA, 230°C for ABS. (Adjust for material.)
Print Speed: 50-60 mm/sec for optimal surface quality.
Supports: Use for complex parts, set density at 15-20%.
Bed Adhesion: Use glue or tape to prevent warping.
Infill: 20% for regular models, 100% for extra strength if needed.
